Beneficial Tips For Using Various Types of Drill Bits

There are three things to consider in taking full advantage of drill bits. First is the degree of the point angle, second are the types of drill bits being used for the specific work like making a starting hole, making lathe center, enlarging the hole, and finishing the hole and last is the size of the drill bits for exact measurements.

Degree of Point Angle
Various types of drill bits have different point angles. These different point angles have different purposes. The advantage of the drill-bits with no point angle is seen in creating flat-bottom blind holes. However, you need to be careful in using these bits because they are sensitive in terms of positioning and movement while making flat-bottom, blind holes. Meaning, even for just slight accidental movement or faulty positioning could mess up the end product.

The advantage of the oil drilling bits with 118 degree of point angle is their flexibility. These could be employed in broad range of tasks. That is why they are the most common drill bits available in most hardware stores. The benefit of the drill-bits with 150 degree point angle is observed in metal works. They are intended in making holes on hard materials. However, bear in mind that they require a starting hole for trouble free operation. There are also those intended for very soft materials. They are those with 90 degree point angle and are particularly sharp you do not need to make a starting hole to get high quality outputs.

Thus, you have to check the point angle of drill bits before actually using them for your work piece. This will assure that the drill-bits are suitable for the materials are working on.

Types of Drill Bits
You must consider the types to be used in a specific project. It avoids wasting materials unnecessarily. Every type of drill bits has its distinct function. There are types you can apply in specific tasks such as creating a starting hole, enlarging the existing hole, or finishing the created hole.

Examples are center, twist and core drill bits. The twist drill-bits are very useful for broad array of tasks, have varied point angles and sizes and could fit for your various work pieces. However, there are demands that could not answer for just using twist drill bits like enlarging holes as much as twice of the hole’s size and finishing the holes that you made. In these cases, core bits will come in handy. Center drill-bits, on the other hand, is perfect for creating a starting hole as a preparation for some bits or bigger drill bits to make a large hole. It can be used not only in forming a starting hole but also in creating lathe center for your work piece.

The Size of the Drill Bits
The size of bits is directly proportional to the size of the hole being made. Thus, it is advisable to match the size of bits with the size of the hole that you want to make in order to observe the exact measure needed.